Grocery Getters 11.0 & 12.0

Class Description
All-Motor Grocery Getters class is a racing class intended for all Ford powered
vehicles that either run 11.0 or 12.0 in the ¼ mile.

SWAPS
Engine swaps permitted.

ENGINE
Engine must be a Ford engine (any size or cylinder or fuel)

TRANSMISSIONS
All transmissions permitted. 

COOLING SYSTEM
Any radiator, water pump and cooling fan/fans permitted; Cooling system must be
contained inside the engine compartment

EXHAUST
Any header size/tubing permitted. Exhaust must exit behind drivers door.
Mufflers optional.

FUEL-DELIVERY SYSTEM
Fuel tank must be OEM and in OEM location. No aftermarket fuel cells allowed.

FUEL
Unleaded or E85 only (One Ethanol, Ignite, or Similar). No E98, C16, Q16, M1

TURBOCHARGERS
Permitted.

SUPERCHARGERS
Permitted.

NITROUS
Permitted.

METHANOL INJECTION
Permitted.

OILING SYSTEM
OEM Oiling system only (OPG Permitted)

INTAKE MANIFOLD
All intakes permitted.  

REAR END
All rear ends permitted.

K-MEMBERS
Aftermarket K-Members permitted, but must attach to the chassis using only the
original factory OEM type mounting bolts in the factory mounting location.
Motor plates ok. No part of the K-member may be permanently attached to the
chassis. K-member may be modified in oil pan area to allow oil pan enlargement
or removal.

CONTROL ARMS
OEM or tubular stock type control arms required which must be attached in stock
location

SHOCKS/STRUTS/SPRINGS
OEM or aftermarket shocks/struts/springs permitted. May use coil overs.

STOCK TYPE SUSPENSION
Stock type suspension may utilize aftermarket, direct replacement type
suspension components including aftermarket replacement shocks, springs, coil
overs and/or control arms. All stock type 3-link and 4- link suspensions must
maintain stock lateral angles and attachment points, but may be moved up or
down on rear axle. Aftermarket torque arms permitted.

PANHARD BARS
If equipped from the OEM.

TORQUE ARMS
If equipped from the OEM.

WISHBONE
If equipped from the OEM.

MINITUB
Prohibited.

WHEELIE BARS
Prohibited.

FRAME
Stock, unaltered frame rails required. Sub-frames may be joined under car. If
connector protrudes through floor, floor must be completely welded to
connector. Stock front /rear sub-frames must remain stock, unaltered, and in
stock location.

TIRES & WHEELS
Any tires and wheels permitted.

WHEELS
Spindle mount wheels prohibited.

INTERIOR
Must have factory dash. Full carpet. Passenger seats required. Aftermarket
front seats are permitted. Rear seats may be removed or have a rear seat
delete. If Kirkey or other Alumimum seat is added, it must be properly secured
to a harness bar. If ballast is used, it must be secured to prevent movement in
all directions (including roll overs). Must have functional AC/Heat. All of
these items will be thoroughly check before each round.

BODY
OEM steel shell required. Aftermarket parts are permitted as long as factory
appearing and are limited to hoods and rear trunk only. Hood are mandatory.
Must have functional headlights and turn signals.

WINDSHIELD & WINDOWS
OEM glass only. No Optic Armor windows or other Lexan glass.

INTERIOR

Must have a factory dash. Full carpet. Passenger seats required. Aftermarket front

seats are permitted. Rear seats may be removed or have a rear seat delete. If
Kirkey or other Aluminum seat is added, it must be properly secured to a
harness bar or cage. If ballast is used, it must be secured to prevent movement
in all directions (including roll overs). All of these items will be
thoroughly check before each round.

BODY

OEM steel shell required. Aftermarket parts are permitted as long as factory
appearing. Hood are mandatory. Must have functional headlights and turn
signals.

FIREWALL

Stock, unaltered firewall required.

ELECTRONICS

2 step, and aftermarket ECU permitted.