Sponsored by Motion Raceworks/Rife Sensors/TBM Brakes
PAYOUT
WINNER: $3,000
RUNNER UP: $1,000
TECH CARD: $200
Tech Card Includes: 1 Racer, 1 Truck/Trailer combo, Golf Cart/Pit Vehicle (in the trailer or on the truck) at the time of entry.
Engine Diaper or Catch Pan is REQUIRED for 10.0 ET or quicker
The 9.5 Index allows for a .1 breakout. You can run a 9.40 and it’ll count. If you run 9.39, the run won’t count during qualifying and eliminated during eliminations. Only exception is a double breakout, the slower car will win. For example, a 9.39 will win over a 9.35.
Qualifying Information, Ladder Type & Tree
All Run Qualifying, NHRA Pro .400 tree, Heads-Up, 1/4 mile, Courtesy Stage (Encouraged)
MINIMUM WEIGHT/WEIGHT BREAKS (ALL WEIGHTS INCLUDE DRIVER)
No Minimum Weight
ENGINE
Engine must be a Modular/Coyote 4.6/5.0/5.4/5.8 based V8 Ford engine. Internal modifications are permitted
TRANSMISSION
Any transmission permitted.
COOLING SYSTEM
Any cooling system permitted. In cab intercooler tanks permitted along with under the hood and trunk.
EXHAUST
Any header size/tubing permitted. Open headers, down pipe permitted. Bumper/Fender exit permitted.
FUEL-DELIVERY SYSTEM
Any fuel system permitted and fuel location permitted.
FUEL
All fuels permitted.
TURBOCHARGERS
Permitted.
SUPERCHARGERS
Permitted.
NITROUS
Permitted.
OILING SYSTEM
Wet and dry oiling systems permitted.
INTAKE MANIFOLD
Air intake coolers and/or ice boxes allowed in passenger compartment. Trunk mounted ice tanks permitted.
REAR END
OEM or Bolt in 8.8 or 9 inch
TRANSMISSION
Any manual transmission permitted.
K-MEMBERS
Aftermarket K-Members permitted, but must attach to the chassis using only the original factory OEM type mounting bolts in the factory mounting location. Motor plates ok. No part of the K-member may be permanently attached to the chassis. K-member may be modified in oil pan area to allow oil pan enlargement or removal.
CONTROL ARMS
OEM or tubular stock type control arms required which must be attached in stock location.
SHOCKS/STRUTS/SPRINGS
OEM or aftermarket shocks/struts/springs permitted. May use coil overs.
SUSPENSION
Stock type suspension may utilize aftermarket, direct replacement type suspension components including aftermarket replacement shocks, springs, coil overs and/or control arms. All stock type 3-link and 4- link suspensions must maintain stock lateral angles and attachment points, but may be moved up or down on rear axle. Aftermarket torque arms permitted. Stock-type, ladder bar, and racing 4-link rear suspension systems are permitted (Pro Cars only).
PANHARD BARS
Permitted.
TORQUE ARMS
Permitted.
WISHBONE
Permitted.
MINITUB
Permitted.
WHEELIE BARS
Prohibited.
CHASSIS
All cars must retain complete stock chassis, floorboard, firewall, and frame rails. Frame rails may be modified in front of the strut tower. Notching of chassis for clearance is permitted. All cars can remove spare tire wheel well and cover with sheet metal.
TIRES & WHEELS
28/29″ are permitted
WHEELS
Spindle mount wheels permitted
BODY
OEM steel (fiberglass/composite if OEM equipped) body shell required. Aftermarket body parts are permitted as long as factory appearing and are limited to hoods, front bumper covers, fenders, doors, and rear deck lids. Hood is required. Any rear wing permitted.
FIREWALL
Stock firewall required
ELECTRONICS
2 step, and aftermarket ECU permitted
LIGHTS
Headlights and brake lights are required (one headlight may be removed for induction)
WINDOWS
Lexan or OEM Permitted .