Battle of the Underdogs (2v vs 3v)

NOTICE: Rules are subject to Change without Notice.

 

Class Description

Battle of the Underdogs is a racing class for all modular 2-valve and 3-valve powered vehicles!

 

Qualifying Information, Ladder Type, & Tree.

All Run Qualifying, Sportsman Ladder, .400 tree, Heads-Up, 1/8 mile, Courtesy Stage (Encouraged)

 

ENGINE

Engine must be a Modular 4.6/5.0/5.4/5.8 based V-8 Ford engine. Internal modifications are permitted

 

SWAPS

Fox body and other swaps permitted

 

COOLING SYSTEM

Any radiator, water pump and cooling fan/fans permitted; Cooling system must be contained inside the engine compartment

 

EXHAUST

Any header size/tubing permitted. Open headers, downpipe ok. Bumper/Fender exit ok.

 

FUEL-DELIVERY SYSTEM

OEM or aftermarket tank in trunk or stock location. Fuel cell in engine bay prohibited.

 

FUEL

All fuels permitted.

 

TURBOCHARGERS:
Any size turbocharger permitted. Twin turbos ok. Nitrous permitted with turbocharger.

 

SUPERCHARGERS:
Any size supercharger. Nitrous permitted with supercharger.

 

NITROUS
Any nitrous setup ok.

 

OILING SYSTEM

Wet sump system only.

 

INTAKE MANIFOLD

Air intake coolers and/or ice boxes allowed in passenger compartment.

 

REAR END

OEM or Bolt in 8.8 or 9 inch

 

TRANSMISSION

Any transmission permitted.

 

K-MEMBERS

Aftermarket K-Members permitted, but must attach to the chassis using only the original factory OEM type mounting bolts in the factory mounting location. Motor plates ok. No part of the K-member may be permanently attached to the chassis. K-member may be modified in oil pan area to allow oil pan enlargement or removal.

 

CONTROL ARMS

OEM or tubular stock type control arms required which must be attached in stock location

 

SHOCKS/STRUTS/SPRINGS

OEM or aftermarket shocks/struts/springs permitted. May use coil overs.

 

STOCK TYPE SUSPENSION

Stock type suspension may utilize aftermarket, direct replacement type suspension components including aftermarket replacement shocks, springs, coil overs and/or control arms. All stock type 3-link and 4- link suspensions must maintain stock lateral angles and attachment points, but may be moved up or down on rear axle. Aftermarket torque arms permitted.
PANHARD BARS
Permitted

 

TORQUE ARMS

Permitted

 

WISHBONE

Prohibited

 

WHEELIE BARS

Prohibited

 

FRAME

Stock, unaltered frame rails required. Sub-frames may be joined under car. If connector protrudes through floor, floor must be completely welded to connector. Stock front /rear sub-frames must remain stock, unaltered, and in stock location

 

TIRES & WHEELS

Any tires permitted.

 

WHEELS:

Spindle mount wheels prohibited

 

UPHOLSTERY

Must have carpet, headliner, and factory appearing dash. Dash can be aftermarket fiberglass, or carbon fiber as long as factory appearing. Passenger seats NOT required.

Aftermarket front seats are permitted. Rear seats may be removed.

 

BODY

OEM steel (fiberglass/composite if OEM equipped) body shell required. Aftermarket body parts are permitted as long as factory appearing and are limited to hoods, front

bumper covers, fenders, doors, and rear deck lids. Hood is required. Any rear wing permitted.

 

WINDSHIELD & WINDOWS

OEM glass or NHRA approved Lexan is required and must maintain a Ford OEM appearance. Optic Armor windows are ok. Braces allowed. If carbon fiber/fiberglass

doors are used Lexan windows with supports allowed.

 

FIREWALL

Stock, unaltered firewall required

 

ELECTRONICS

Trans brake, 2 step, and aftermarket ECU permitted